Fanuc R-2000iA/165 EWPrint this page
Fanuc R-2000iA/165 EW
With integrated cables for optimum up-time spot welding
The R-2000iA/165EW is a high speed/high payload industrial robot with six axes, with maximum reliability, supported by an service extensive network and spare parts.
FANUC adds the cable integrated robot R-2000iA/165EW to the R-2000iA series, world-wide popular as a multifunctional and intelligent robot.
The SYSTEM R-J3iB is the best possibility as controller system for this robot.
The R-2000iA/165EW is the solution for independent spot welding and general assembly, as well as for industrial spot welding applications.
Maximum weight: 165 kg
Maximum range: 2.650 mm
Repetition accuracy: ± 0,3
Axes: 6
Motion speed:
J1 :105°/s
J2 : 90°/s
J3 : 105°/s
J4 : 130°/s
J5 : 130°/s
J6 : 210°/s
Motion area:
J1: 360°
J2: 135°
J3: 204°
J4: 720°
J5: 250°
J6: 440°
Application: spot welding
Characteristics
- Cables and hoses for spot welding are integrated into the J3 arm and the wrist.
- Customers can use the robot immediately after connecting the controller. It is not necessary to install, adjust or maintain an external cable package.
- Integrated cables and hoses have the same life as standard robot inner cables, extending the maintenance period of the cables.
- J1-J3 units are the same as the R-2000iA/165F,
whose reliability has been well confirmed.
(Mechanical)
- Large work envelope with ability to reach overhead and behind.
- Slim profile design
- RV reducers for all axes
- Elimination of counterweight increases available workspace
- Process/application cables routed through the arm
- No motors at wrist
(Control)
- B-size cabinet / Quick change amplifier (< 5 min)
- Fast boot-up time
- Easy connections to a variety of I/O, including distributed I/O networks
(Software)
- Specific tool packages for various applications
Benefits
- Reduce the lead time for completion of the line.
- There are no exposed cables and hoses at the J3 arm to interfere with peripheral equipment.
- Increased reliability of cables and hoses.
- Easier, quicker on-line programming.
- Cable simulation is not necessary, so it is easy to perform accurate offline programming.
- Maintenance cost can be reduced.
- Start-up time can be reduced.
Options
- Variety of internal cables to meet the customer process requirements.